In the “Towards the Nest” quest in Crimson Desert, you must turn on the Crescent Skybridge by completing a rather confusing puzzle. This guide details everything you need to know for aligning the crystals, connecting the wires, and activating the panel to spawn the Skybridge. Follow these steps carefully and complete the puzzle as smoothly as possible.
Reaching and Aligning the Crystals
Start by locating the central laser on the Crescent Skybridge and connecting it to the crystal in the center by using your charge. Then head to the top right side of the Skybridge using abilities like double jump, grappling hook, or active charge. You can even climb the vines if needed.
Once there, you’ll need to realign the crystals in the following way: first, the right-side crystal, where you’ll need to connect to it using charge and ensure that the laser coming out of it is connected to the crystal in the center. Then, go to the adjacent one and repeat the same process. Finally, there’s a central crystal as well, which will already be aligned.
Connecting the Wires
With all the crystals aligned, jump up on the central crystal and glide carefully to avoid lasers, connect yourself to the wall, grapple up, and connect the wires you’ll find on the left side. Once done, move along to the next one you’ll find along the right side path; the wire is located near a tree. Connecting all wires is essential to activate the panel.
Activating the Skybridge
Once done, return to the center, climb on top of the circuit, and use your Force Punch ability to activate the panel. Then, climb up the panel and head to the right side, pass through the transparent gate that you’ll find there, attach your cable to the device you’ll find after going through the gate, and rotate the light in the middle until it clicks into place. The Skybridge will then spawn. All you need to do after that is complete the jumping puzzle to get across and finish this section.
Note: You can choose to simply glide to the other side which will make everything easier for you.
