Fix Valorant Error Code Van9005

Are you encountering Valorant error code Van 9005 while trying to play the game? This error is often caused by Virtualization-based Security (VBS) settings in Windows 10. However, don’t worry! In this article, we will guide you through the process of fixing this error by checking your UEFI mode and enabling TPM 2.0. These settings are crucial for Valorant to run smoothly on your PC. Follow the steps below to troubleshoot and resolve the Van 9005 error code.

Read: Fix Threads App ‘No Sound or Audio’ on Uploaded Videos

How to Fix Valorant Error Code Van 9005

Valorant is an immensely popular online game, but sometimes players encounter error code Van 9005. This error is often related to the Virtualization-based Security (VBS) setting in Windows 10. To resolve this issue, you need to check your UEFI mode and enable TPM 2.0.

Check UEFI Mode

To ensure Valorant runs smoothly, you should check if your PC is set to UEFI mode. Here’s how:

1. Press the Windows Key.
2. Type “msinfo32” and press Enter.
3. In the System Information window, click on System Summary in the left panel.
4. Scroll down and verify that the BIOS Mode value on the right is set to “UEFI.”

Verify TPM 2.0 Support

TPM 2.0 (Trusted Platform Module) is essential for running Valorant without errors. Follow these steps to check if your system supports TPM 2.0:

1. Click on the Windows Key.
2. Type “tpm.msc” and press Enter.
3. If TPM is not supported or enabled, you will see a specific screen indicating this.

Enable UEFI Mode and TPM 2.0

If your system supports both UEFI mode and TPM 2.0, it’s important to enable them. Please note that the process may vary depending on your PC manufacturer and BIOS version. Here’s a general outline of what you should do:

1. Restart your PC.
2. Look for a message during startup that says “Hold XX Key to enter BIOS.”
3. The most common keys are F1, F2, F10, F12, Del, or Esc.
4. Repeatedly press the BIOS key to access the BIOS menu.
5. Refer to your PC manufacturer’s guide for specific instructions on enabling UEFI mode and TPM 2.0. You can find guides for common manufacturers like ASUS, Dell, HP, Lenovo, and MSI.

Disable Virtualization-Based Security

If enabling UEFI mode and TPM 2.0 doesn’t resolve the Van 9005 error code, you can try disabling Virtualization-Based Security (VBS) using the following steps:

1. Check if VBS is enabled:
   • Click on the Windows Key.
   • Type “msinfo32” and press Enter.
   • In the System Information window, check the right panel for “Virtualization-based security.” If it is running, VBS is enabled.
2. Disable VBS:
   • Open Command Prompt as an Administrator.
   • Paste the command “bcdedit /set hypervisorlaunchtype off” and press Enter.
   • Restart your PC and verify if VBS is disabled.

If the error persists, reach out to Valorant’s support for further assistance.

Read: How to Fix Netflix Error Code 15001